Why is the "Pause/Stop" button stuck on red? Some additional information on colors and text can be found here: To engrave a fill you need to use raster engrave. If the fill color is set to red or blue it will not result in vector features. Only Stroke features can be vector cut or vector engrave. Double check your colors if the items are not recognized.Ģ. The colors can be incorrect by a value up to 9 so (246,9,9) will still register as vector cut. The color for vector engrave should be (0,0,255). The color for vector cut should be (255,0,0) red=255, green=0 and blue=0. Generally there are two reasons that items are not recognized as vector items.ġ. Didn’t nail down the tolerances on the first go though, so it is a bit wobbly.Why is my design not recognized as vector cut or vector engrave? Yes, it is a stand! I’ts a test bench to temporarily hold a giant (pellet fed) 3d printer extruder. I guess it just picks up both? I would hope that if some sketch geometry is hidden, then it would ignore it, but I guess not. You can’t really problem solve without discussion…Įdit 3: Yeah, technically it is 2 sketches on top of each other, although the main one is hidden at the time. I wonder if the sketch picks up the geometry without the “projection” ? The outlines don’t show up on the sketch plane without it…hmmmĮdit:2 Wow they really close these down quick. Then just exporting that new sketch as a DXF. For fusion users- What I have been doing was creating a new sketch on the surface of the object and then projecting the geometry onto that sketch. I might try the same fusion-inkscape process with 0.92 to see if it was a bug with 0.91Įdit: nope, it appears it comes into Inkscape like that from fusion. What is weird is that it also did it with a 3rd party file as well (not one from fusion 360). That did it! I tried the ungroup in 0.91 to no avail, but the duplicates instantly showed up in 0.92.2! Thank you so much for your help! That explains it. SAVING OUTLINE IN INKSCAPE TO DXF MANUALOn an unrelated note, is there any way to see what the stock proofgrade settings are? That would really help judge the kind of power it takes to cut through different materials when you want to use manual mode. Anyone else have any problems with this? It is a bit frustrating since it doubles the time to cut each part, and it just chars the edges of everything. It only happened once, but I used the exact same Fusion-Inkscape-GFUI process to create that svg. Then I thought it was just the standard proofgrade settings to do 2 passes (This all happened with Medium Draftboard,Medium Acrylic, and Medium Maple), but I had 1 time where it didn’t do it. I have done cuts where they are right next to each other before, but it appears to cut directly on top of the previos path. One thing I did notice is that it appears to cut exactly on top of the original cut. I cant really see the toolpath very well in the preview (cant zoom in either) strong text, which would help me diagnose if it’s the svg or the glowforge software. Then I thought it might be because the line was too wide making 2 side by side cuts to cut away the material, but changing the line thickness down to 0.1mm didn’t solve it either. I first figured it was duplicate lines in Inkscape, or maybe the lines were actually filled in objects, and not vectors, but I am able to adjust the line width in inkscape just fine. The problem that I am running into is that when I go to cut (not engrave) the glowforge does 2 passes to cut through the material. My current Fusion360 workflow (until dxf is available) is to export as a dxf in fusion, bring it into inkscape, save as a “Plain SVG”, and then import it into the GFUI. I tried searching the forums for an answer, but I unfortunately didn’t have any luck.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |